Go Bottommixing R4 front tires and turf rear tires
 | Anthony M. Parente
Join Date: Posts: 1 
|
2000-07-02 17642
Has anyone had experience with using R4 Tires on the front and Turf tires on the rear ? I have constant problems with thorns causing flats in both front turf tires, on my JD755 MFWD/FEL/BH Tractor.
Reply to |
Quote Reply |
Add Photomixing R4 front tires and turf rear tires
| TomG
Join Date: Feb 2002 Posts: 5406 Upper Ottawa Valley 
|
2000-07-03 17645
Should work if you can find some industrials that have a rolling circumference within the recommended front/back axle drive ratio for the tractor.
....
Reply to |
Quote Reply |
Add Photomixing R4 front tires and turf rear tires
| Steve in CT
Join Date: Posts: 1
|
2000-07-03 17666
See the link to the Firestone webpage for a discussion of "Lead/Lag" - very important!!! ....
Link:
Click Here
Reply to |
Quote Reply |
Add Photomixing R4 front tires and turf rear tires
| evansgarr
Join Date: Posts: 1
|
2000-07-04 17692
Instead of investing in new tires, I'd put "SLIME" in all four tires and your thorn problem will be over. I had the same problem, installed the slime and solved it.
The best price and service I found for this product is @ ruralking.com ....
Reply to |
Quote Reply |
Add Photomixing R4 front tires and turf rear tires
| ken dyck
Join Date: Feb 2002 Posts: 20 domain, manitoba
|
2000-07-04 17709
you can mix any style. like one of the replies said the you have to watch the size. on the 750 the rear static loaded radius should be 1.593 (front to rear axle ratio) times the static loaded radius of the front. you should add a correction factor of 1 to 5%, as the front should turn 1 to 5% faster than the rear ....
Reply to |
Quote Reply |
Add Photomixing R4 front tires and turf rear tires
| ken dyck
Join Date: Feb 2002 Posts: 20 domain, manitoba
|
2000-07-04 17710
note the correction factor would be added if you read my reply literaly.
ie: a; measure your rear static loaded radius.
b; divide this # by 1.593.
c; multiply this by 1.01 to get the minimum
static loaded radius of front tire.
d; multiply this by 1.05 to get the maximum
static loaded radius of front tire.
any tire whose static loaded radius falls within this range is safe to use and will not damage parts. air presure comes into play. i taped a nail to a carpenters level and measured from this point to ground. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This